TMM 24112

AC/DC Power Supply TMM 24 Series, 24 Watt • Fully encapsulated low profile plastic casing in PCB version • 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition • IT and industrial safety according to IEC/EN/UL 62368-1 • Ready to meet ErP directive 95%, 0.5 periods, perf. criteria A >95%, 1 period, perf. criteria A >95%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point 95% max. (non condensing) –40°C to +80°C –40°C to +95°C 5 %/K above 65°C See application note: www.tracopower.com/overview/tmm24 142°C typ. (Automatic recovery at 67°C typ.) Internal IC temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TMM 24 Series, 24 Watt Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Leakage Current Reliability Washing Process Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile - Input to Output, 60 s - Input to Output, 500 VDC - Touch Current - Calculated MTBF Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Natural convection (20 LFM) 5'000 m max. 132 kHz typ. (PWM) Reinforced Insulation 240 VAC 4'000 VAC 1'000 MΩ min. 100 µA max. 400'000 h (MIL-HDBK-217F, ground benign) Not allowed Plastic resin (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) Lead-Free Wave Soldering 260°C / 10 s max. 137 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 00fa944a-42c8-4d91-b61b-9fa1247d6557 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmm24 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TMM 24 Series, 24 Watt Outline Dimensions 54.0 (2.13) 11.43 11.43 5.0 4 (0.20) 5 5.0 6.0 20.32 (0.80) 27.0 (1.06) (0.24) 1 Dual Output 1 AC (N) AC (N) 2 AC (L) AC (L) 4 –Vout –Vout 5 No pin Common 6 +Vout +Vout (0.20) Bottom view 40.0 (1.57) 2 x M4 THD 74.0 (2.91) 20.7 (0.81) 62.0 (2.44) 20.7 (0.81) 2 Pin Single Output (0.45) (0.45) 6 Pinout 19.5 (0.77) 0.7 (0.03) 6.0 (0.24) Dimensions in mm (inch) Tolerances ±0.5 (±0.02) Pin Ø 1.0 ±0.1 (0.04 ±0.004) Pin pich tolerances ±0.25 (±0.01) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5